What are the possible failures of the friction plate during use?
When the friction plate is in use, there will generally be many unpredictable failures. If these failures are not resolved in time, they may have a serious impact on our use. What are the reasons for these failures? The editor summarizes the following points.
Failure analysis of friction plate:
1. The friction plate installation does not meet the standard
The clearance of the friction lining is usually changed and completed when it is put into production. After the installation of the friction lining, the clearance compliance should be approved, and the compliance confirmation should be carried out through inspection and testing.
2. Friction plate wiring and joints are unstable
Its connection end should be installed under the specific nut of its own connection wire together with the stator connection end to ensure that the customer will never impact the reliability of the old connection when connecting the wire.
3. The friction plate is released after power on
Perhaps the reasons include the damaged coil, the power supply has not been connected or the voltage is insufficient, the working gap is very small and it is difficult to pull in.